Home| Services| Projects| Products| Corporate| News| Safety Program| Contact Us
   
Door Closers | Mounting Plates and Drop Brackets
Sargent 1430-B Mounting Plate

For use with Sargent 1430, 1431 Series Door Closer. Fits right and left hand doors. Will accomodate most auxiliary overhead door holders (top jamb application). Also required for low ceiling conditions.

 
Sargent 1430-D Drop Bracket

For use with Sargent 1430, 1431 Series Door Closer. Fits right and left hand doors. For use where top rail of door is too narrow to mount closer (parallel arm and track applications).

 
Sargent 351-A Mounting Plate

For use with Sargent 351 Series Door Closer. Permits mounting closers on double rabbeted frames. 1-3/4” minimum rail required on top casing. Fits both right and left hand doors.

For use with Sargent 351 Series Door Closer. Permits mounting closers on double rabbeted frames. 1-3/4” minimum rail required on top casing (top jamb application). Fits both right and left hand doors. Permits mounting 350 Series closers on narrow top rail doors (Standard and track applications).

 
Sargent 351-B Mounting Plate

For use with Sargent 351 Series Door Closer. Fits right and left hand doors. Will accomodate most auxiliary overhead door holders (top jamb application). Also required for low ceiling conditions.

 


Sargent 351-D Drop Bracket

For use with Sargent 351 Series Door Closer. Fits both right and left hand doors, where top rail of door is too narrow to mount closer (parallel arm and track applications.)
 


LCN 1370-18 Mounting Plate

For use with LCN 1370 Series Door Closer. Required for hinge side mount where top rail is less than 2 1/4” (57 mm). Plate requires 1 1/2” (38 mm) top rail.

 


LCN 1370-18PA Mounting Plate

For use with LCN 1370 Series Door Closer. Required for parallel arm mounting where top rail is less than 4 1/2” (114 mm), measured from the stop. Plate requires 2 1/4” (57 mm) minimum top rail.

 


LCN 1460-18 Mounting Plate

For use with LCN 1460 Series Door Closer. Required for hinge side mounting where top rail is less than 2 1/4" (57mm). Plate requires 1 1/2" (38mm) top rail.

 
  LCN 1460-18PA Mounting Plate

For use with LCN 1460 Series Door Closer. Required for parallel arm mounting where top rail is less than 4 1/2" (114mm), measured from the stop. Plate requires 2 1/4" (57mm) minimum top rail

 
Hinges
3 Knuckle
5 Knuckle
Continuous
Double Acting
Miscellaneous
Piano

Locks
Aluminum Door Hardware
Auxiliary Locks
Cylindrical Locks
Decorative Escutcheon Plates
Door Lock Guards
Handleset and Entryset Locks
Installation Tools
Latches and Strikes
Mortise Cylinders
Mortise Locks
Padlocks
Parts and Accessories
Portable Security Cables
Rim Cylinders
Storm / Screen Door Latches

Exit Devices
Mullions
Rim
Surface Vertical Rod
Trim

Door Closers
Arm Assemblies
Mounting Plates and Drop Brackets
Surface Mounted

General Hardware
Bi-Passing Door Hardware
Closet Rods and Coat Hooks
Door Bolts
Door Stops and Holders
Door Viewers
Flat Goods
Mail Boxes and Slots
Miscellaneous
Shelf Brackets and Standards
Sliding Door Hardware
Sliding Pocket Door Hardware
Track and Guides

Door Hardware
Quality Italian Door Hardware


contact us



© Copyright 2007-2012 catcan.ca
Home | Services | Projects | Products | Corporate | Safety Program | Contact Us